How-To: Clock IN/OUT on a Z11 Time Clock

How to clock In/Out on a Z11 time clock

Before you are able to clock In/Out on the Z11 time clock you will need to obtain either a time card or a Personal Identification Number (PIN) from your supervisor, manager, or employer. When the Z11 records a time (sometimes referred to as a ‘punch”) for an employee, it will need to know if the employee is clocking in or clocking out.


CLOCK IN:
 
Step 1. To clock IN, Press the number “1” key. Note: If you press the wrong key while clocking IN, simply press the “X” key to cancel.




Step 2. Hold your proximity card or key fob in front of the Z11 time clock. A beep will then sound and the clock will display “Success IN.” The display screen will once again show the date and time.
 
 
 


Or manually input your employee PIN number and press the “OK” key. A beep will sound and the clock will display “Success IN.” The display screen will once again show the date and time. Note: If you are unable to clock IN contact your supervisor, manager or employer for assistance.
 
 

CLOCK OUT:
 
Step 1. To clock “OUT” press the number “2” key. Note: If you press the wrong key while clocking OUT, simply press the “X” key to cancel.

 
 
 
Step 2. Hold your proximity card or key fob in front of the Z11 time clock. A beep will then sound and the clock will display “Success OUT.” The display screen will once again show the date and time
 
 
 
Or manually input your employee PIN number and press the “OK” key. A beep will sound and the clock will display “Success OUT.” The display screen will once again show the date and time. 

 
 
 


Note: If you are unable to clock OUT contact your supervisor, manager or employer for assistance.
 
 

Attachments

Time_Clock_-_Z11.pdf Time_Clock_-_Z11.pdf

Did you find this article helpful?