How-To: Clock IN/OUT on a Z33 or Z34 Time Clock

How to clock In/Out on a biometric Z33 & Z34 time clock

Before you are able to clock In/Out on the Z33 or Z34 time clock you will need to obtain a Personal Identification Number (PIN) along with having your fingerprint enrolled on the time clock by your supervisor, manager, or other designated individual. When the Z33/Z34 records a time (sometimes referred to as a ‘punch”) for an employee, it will need to know if the employee is clocking in or clocking out.
 
CLOCK IN:

Step 1. To clock “IN” press the number “1” key. See (illustration 1.1).

Step 2. Enter your PIN number and press “Ok.” (If you are not required to enter one, skip this step).

Step 3. Touch the fingerprint sensor using the same finger you enrolled with. A beep will sound letting you know you are clocked “IN.” The display screen will display “Success IN,” and return to showing the date and time.


 
(Illustration 1.1 Z33 Time Clock)
 
CLOCK OUT:

Step 1. To clock “OUT” press the number “2” key. See (illustration 1.1).

Step 2. Enter your PIN number and press “Ok.” (If you are not required to enter one, skip this step).

Step 3. Touch the fingerprint sensor using the same finger you enrolled with. A beep will sound letting you know you are clocked “OUT.” The display screen will display “Success OUT,” and return to showing the date and time.
Note: If you are unable to clock In/Out contact your supervisor, manager, or other designated individual for assistance. 





 

Attachments

Time_Clock_-_Z33___Z34.pdf Time_Clock_-_Z33___Z34.pdf

Did you find this article helpful?