TimeWorksTouch

Connecting TimeWorksTouch to the Internet

Use the instructions below that correspond to your selected network type: Wi-Fi or Ethernet: Wi-Fi Network Setup Open the device settings by tapping the Settings icon on the Home screen (see Figure 1). I...

Read Article

TimeWorksTouch Manual

TimeWorksTouch is SwipeClock's hardware clock that combines biometric and prox card capabilities with Intelligent Clock features. In order for your client to take advantage of TimeWorksTouch, they need WebClock...

Read Article

Using Fingerprints on TimeWorksTouch

TimeWorksTouch includes a built-in fingerprint scanner for employee authentication. IMPORTANT: If you are looking for information on our Z33/34 biometric clocks, please see Biometric Clocks. This article exp...

Read Article

Trusted PINs on TimeWorksTouch

If an employee fingerprint cannot be enrolled on the TimeWorksTouch clock due to worn and unreadable fingerprints, the solution is to allow them to use a PIN or Prox card to identify themselves at the clock. Un...

Read Article

Updating Software for TimeWorksTouch

TimeWorksTouch clocks update their software automatically without any initiation. It is still important to have some familiarity with the process and understand how you can change the clock’s daily check for up...

Read Article

Troubleshooting TimeWorksTouch

Network Connections When the clock is offline (not connected to the internet), follow these troubleshooting steps: For Ethernet Connections Verify the cable is connected to the clock and your network port...

Read Article

Offline Mode for TimeWorksTouch

TimeWorksTouch still collects punches when its connection to the internet is dropped. However, when a loss of connectivity occurs, the clock operates differently. We refer to this state as “Offline Mode” and th...

Read Article

TimeWorksTouch Device Specs

Radio Frequency Transmissions From the device's FCC Verification of Conformity certificate The device, as described herewith, was tested pursuant to applicable test procedure and complies with the requirements...

Read Article

TimeWorksTouch - Finding the Readable Number on a Proximity Card/Fob

The TimeWorksTouch clock will use the number indicated on our MANGO cards minus any leading 0s. You will need to add that in Employee Setup as the employees PIN/Login. In the event the card number is not legib...

Read Article